通用配置

由platformio-esp32支持的配置。

覆盖开发板配置

部分配置以board_前缀开始,用于覆盖单独开发板的配置。

参考具体开发板配置:

C:\Users\用户名\.platformio\espressif32\boards

/home/用户名/.platformio/packages/espressif32/boards

下方是 esp32dev (Espressif ESP32 Dev Module)配置json文件。如果需要在platformio.ini中覆盖build下方的内容，如需要修改flash模式至qio。在对应[env:xxx]选项中配置该项: board_build.flash_mode = qio 同理upload节点下方同理加上board_前缀: board_upload.flash_size = 8MB

{
  "build": {
    "arduino":{
      "ldscript": "esp32_out.ld"
    },
    "core": "esp32",
    "extra_flags": "-DARDUINO_ESP32_DEV",
    "f_cpu": "240000000L",
    "f_flash": "40000000L",
    "flash_mode": "dio",
    "mcu": "esp32",
    "variant": "esp32"
  },
  "connectivity": [
    "wifi",
    "bluetooth",
    "ethernet",
    "can"
  ],
  "debug": {
    "openocd_board": "esp-wroom-32.cfg"
  },
  "frameworks": [
    "arduino",
    "espidf"
  ],
  "name": "Espressif ESP32 Dev Module",
  "upload": {
    "flash_size": "4MB",
    "maximum_ram_size": 327680,
    "maximum_size": 4194304,
    "require_upload_port": true,
    "speed": 460800
  },
  "url": "https://en.wikipedia.org/wiki/ESP32",
  "vendor": "Espressif"
}

Last modified: 17 十一月 2024